HGV theory test topics
Fourteen Highway Code bands appear in the hgv multiple-choice paper.
- Alertness โ revise via hgv mock
- Attitude โ revise via hgv mock
- Safety and your vehicle โ revise via hgv mock
- Safety margins โ revise via hgv mock
- Hazard awareness โ revise via hgv mock
- Vulnerable road users โ revise via hgv mock
- Other types of vehicle โ revise via hgv mock
- Vehicle handling โ revise via hgv mock
- Motorway rules โ revise via hgv mock
- Rules of the road โ revise via hgv mock
- Road and traffic signs โ revise via hgv mock
- Documents โ revise via hgv mock
- Incidents, accidents and emergencies โ revise via hgv mock
- Vehicle loading โ revise via hgv mock
Drivers' hours, at awareness level
The HGV question paper expects you to recognise a drivers' hours problem, not to quote a statute from memory like a transport manager. You should be able to look at a simple day and see that a break was too short, that driving time has run on, or that a daily rest has been cut in a way the rules do not allow. The Official DVSA Guide to Driving Goods Vehicles is the book to work from, alongside The Highway Code.
A typical revision scene: you started at 6am, drove, took 15 minutes over a bacon roll, and called it a break. If the rules require a longer break before you continue, the roll was food, not compliance. Another scene: a mate says the weekly rest can be "made up next month". Your job on the paper is to know that casual promises are not the rules, and to choose the answer that keeps the record legal.
Keep a one-page sketch of a legal day and a one-page sketch of a day that fails. Test yourself by covering the labels. If you can only remember the pictures when the options are in front of you, you will stall in the room. The pass mark is 85 out of 100 across the whole paper, and hours questions are an easy place to drop a cluster of marks.
Tachographs without playing the engineer
Tachograph questions sit at the same awareness level. You should know what the unit is for, that it records driving, other work, and breaks, and that the driver is responsible for the record being honest. You are not being asked to calibrate the head or to strip a sender. You are being asked what happens if you leave it in the wrong mode, or if you pull the card and hope the gap will not show.
Mode errors are a favourite because they are ordinary. You help load the trailer and leave the unit on break. You take the card out at a ferry check-in and forget the manual entry. On the road that becomes an incomplete record. On the paper it becomes a question with one answer that owns up to the duty and several answers that hide it. Pick the duty.
Company cards, workshop cards, and driver cards are different objects. Learn which one a driver uses and what you must do if the card is lost or faulty before a journey. The detailed workshop procedure can stay with the workshop. The "do I drive anyway and explain later" procedure will be in the question, and the safe answer is the one in the official guide.
Axle weight and gross weight
Plates and documents state axle weights and a gross weight. Both matter. A vehicle can be inside its gross weight and still be illegal because one axle is over its limit, which is what happens when a heavy pallet sits too far forward or a tail-lift holds the load in the wrong place. Candidates who only add up the total miss that question every time.
Revision that works is a sketch. Draw a rigid lorry, mark the front axle and the rear, and put the load in three places: over the rear, over the front, and centred. Say which axle complains in each case. Then do the same for an articulated combination, where the tractor axles and the trailer axles do not share the weight in the way a car driver expects.
You will also meet questions where the plate, the train weight, and the road sign disagree in the scenario. The sign can restrict you further than the plate. The plate can restrict you further than a customer's wish to "just get it on". The answer is the lowest limit that applies to that vehicle on that road, read from the official sources, not from the loading bay.
Load security
Load security questions are about the load staying put when you brake, corner, or climb. Straps, chains, sheets, and the way the load is blocked all come into it. A neat stack with slack straps is a wrong answer that looks right in a photograph. The paper will describe the slack, or the missing edge protection, or the sheet that is only there for the weather.
Think about a curtain-sider on a roundabout. The load shifts, the curtain bulges, and the driver never felt a "bump". That is the incident the questions are written from. Your revision sentence is: if it can move, it is not secure, even if the yard photo looked square. Partial restraint is a favourite distractor. "Mostly strapped" fails.
Different goods need different methods. Pallets, loose lengths of timber, liquids, and hanging meat do not share one diagram. You are not expected to be a cargo surveyor. You are expected to reject an answer that ignores movement, or that treats the curtain as the restraint. Read the load chapter in the goods-vehicle guide until those differences feel ordinary.
The 7.5 tonne environmental weight sign
A circular sign with a lorry silhouette and a weight, often 7.5 tonnes, is there to keep heavier goods vehicles off a road that cannot take them, or off a street that should not have them. Car drivers glance and carry on. You cannot. If your vehicle's maximum gross weight is over the figure, that road is closed to you, however quiet it looks at 6am and however much time the diversion costs.
The trick in the question is the vehicle, not the sign shape. A 7.5 tonne vehicle at exactly the limit, a heavier rigid, and an articulated combination are not the same case. Read the sign as it is taught in Know your traffic signs, including any exception plate for loading or access. Inventing an exception because "we deliver here" is how the mark is lost.
Pair the sign with a map habit. When you revise, take a local industrial estate and find the environmental weight restriction on the residential cut-through that your car sat nav would offer. Say the diversion aloud. On the paper, the candidate who chooses the restricted road to save ten minutes is the one the question is written to catch. The HGV mock is a good place to see whether you still pick that shortcut.
Bridge strikes
A bridge strike question is a height question with consequences. You need the height of the vehicle as it is today, including the trailer, the body, and anything that sits above the stated figure, and you need the signed height of the bridge. If you do not know the vehicle height, you do not enter. A car sat nav has sent plenty of lorries into railway bridges. "It looked high enough" is not a defence and it is not a theory answer.
Signs may show a metric figure, an imperial figure, or both. Revise both until you stop converting badly under pressure. A misread of 4.4 metres against a trailer you remember as "about fourteen feet" is exactly the arithmetic the paper will offer you, with one precise answer and several that round the wrong way.
Low bridges also punish a last-second swerve. If you have passed the warning signs and the arch still looks tight, the safe action is the one that stops you before the bridge, not the one that hopes the middle of the road will do. Learn the warning signs in Know your traffic signs until you can sketch them. Then add one rule: know the height before you move off, and believe the sign over the sat nav.